GPS
1000 GPS Sync Radio GPS Synchronized Backhaul Master

Utilizing GPS sync, the ePMP is an ideal fit for networks that require capacity and reliability for superior QoS in remote and underserved areas. This integrated PTP and PMP solution features an efficient GPS synchronized operational mode that permits highly scalable frequency reuse. When deployed with a sector antenna, the radio can be configured as a GPS Synchronized Access Point serving ePMP Integrated Radios configured as Subscriber Modules. When deployed with a high gain point to point antenna, the ePMP GPS Sync Radio can be configured to be a GPS Synchronized Backhaul Master, forming a PTP link with another ePMP Radio module.

$0.00 Select options
5 GHz – 6.4GHz 30dBi Heavy Duty MIMO 2×2 PtP Dish Antenna 2-Pack

The Altelix AD5G30M2-PRO 2-PK is a Complete High Gain Antenna Kit that features our Heavy Duty 30dBi Dual Polarized 2×2 MIMO Parabolic Dish Antenna. The versatile adjustable feed system allows the antenna to be configured for Dual Polarization (Horizontal and Vertical) or for X-Polarization (+45° and -45°). It is a perfect match for 802.11a MIMO access points and bridges. It also supports the new 6.2 GHz and 6.4 GHz radios now available.

Add to Quote
Ubiquiti
5 GHz Ubiquiti PrismStation 45 degree antenna MOQ 4
Shielded airMAX® ac BaseStation with airPrism®Technology

With a die-cast aluminum base and interchangeable antenna, the PrismStationTMAC, brings increased performance to your network using technology that isolates beam communications between your devices. Utilizing Ubiquiti’s advanced airMAX® ac processor, the PrismStationTM delivers throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+ miles).

$299.00 Add to Quote
NanoBeam
5GHz airMAX NanoBeam Gen2 Radio 450+Mbps antenna

5GHz airMAX AC NanoBeam Gen2 CPE Radio with speeds up to 450+Mbps, 19dBi antenna; v8 airOS with airMAX processor & airMagic; RF shielding, improved RF isolation & noise immunity; dedicated WiFi radio for management and quick setup via UMobile App.

$99.00 Add to Quote
64MB
64MB RouterBOARD 2011iL-RM with Atheros 74K

The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.

The RB2011iL-RM includes a new feature – power injector on Ethernet port 10 – it can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports and five Fast Ethernet ports for unbeliveable USD 99!

RouterBOARD 2011iL-RM comes with 1U rackmount enclosure and power supply.

$99.00 Add to Quote
dual-band
AC18 – AC1900 Smart Dual-Band Gigabit WiFi Router
The AC18 leads the way to the next generation routers. With the all-new 802.11ac Wi-Fi dual-band Gigabit wireless, this powerful Dual Broadcom ARM Cortex-A9 CPU and 256MB DDR3 provides the best performance in both 2.4GHz and 5GHz in its class. The 5GHz band peforms up to 1300Mbps, with the 2.4GHz frequency tops 600 Mbps. This serves an incredible combined bandwidth of 1900 Mbps. That’s six times the speed of standard wireless-N routers! With the Beamforming+, built-in high powered amplifiers and external antennas, its coverage ups to 500㎡, you can enjoy lag-free gaming and uninterrupted video streaming anytime anywhere. Smart management via Tenda app for WiFi schedule, LED indicator and power saving which support all of your smart and eco-friendly lifestyles.
$91.20 Add to Quote
radio
AirFiber 11FX

AF-11FX, a radio purpose-built for outdoor PtP bridging and carrier-class network backhauls using the licensed 11 GHz radio band.

Add to Quote
antenna
antenna SXT SA5 is a low cost, gigabit 5GHz outdoor 90 degree

SXT SA5 is a low cost, high speed gigabit 5GHz outdoor wireless sector access point. It has a ninety degree antenna to provide a wider
coverage than our previous SXT units. Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes.

SXT 5 is a low cost, high speed 5GHz wireless device. It has a dual chain antenna and supports 802.11n and Nv2 TDMA technology to achieve 200Mbit throughput speed! Complete with a ready to mount enclosure and built-in antenna, this is the perfect CPE!

We are now offering the SXT SA5 bundled with FIVE SXT-5 client devices -for the price of five SXT 5 units, you get a complete kit.

$445.00 Add to Quote
BaseBox2
BaseBox2 outdoor 2.4Ghz wireless device, two SMA antennas,

The BaseBox2 is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.

The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.

Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.

$0.00 Select options
Sale!
C000000L024A – cnPilot R200 US, 802.11n single band 300Mbps WLAN Router with ATA

cnPilot[tm] Home & Business R200 and R201 – Simplifying the Network

Extending the service provider’s indoor reach and streamlining components for a simplified indoor network. Versatile multi-function WLAN access points, offering remote visibility and end-to-end troubleshooting, extend the service provider’s indoor reach.

$70.00 $46.90 Add to Quote
C050900R051A – ePMP1000

C050900R051A – ePMP1000

ePMP 1000: 5GHz AP Lite / Force 110 PTP Radio (ROW) (no cord)

$209.00 Add to Quote
carrier
carrier grade router Cloud Core CCR1036-12G-4S

CCR1036-12G-4S is an carrier grade router with a cutting edge 36 core Tilera CPU! Unprecedented power and unbeatable performance – this is our new flagship device. Over 20 times faster than our previous top model, the Cloud Core supports throughput of up to 24 million packets per second, or up to 16 gigabits – full wire speed.

The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, serial console and a USB port. A color touchscreen displays device status, traffic graphs, or provide access to simple configuration options.

It has two SODIMM slots, by default it is shipped with 4GB of RAM, but has no memory limit in RouterOS, so will accept and utilize 16GB or more. It comes with power supply and 1U rackmount case.

The cloud core router is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

$995.00 Add to Quote
Router
Cloud Core Router 1009-7G-1C-PC Ethernet ports

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes:

No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.

$425.00 Add to Quote
core
Cloud Core Router CCR1009-7G-1C-1S+PC

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes

No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.

Unit also includes a LCD touchscreen, smart card slot, microSD and a SFP+ port for 10G connections.

$495.00 Add to Quote
Core
Cloud Core Router CCR1016-12S-1S+industrial grade router

CCR1016 is an industrial grade router with a cutting edge 16 core Tilera CPU. If you need many millions of packets per second – Cloud Core Router is your best choice.

This model has twelve SFP ports and one SFP+ port for 10G connectivity. It is available in a 1U rackmount case and also has a serial console port, a touchscreen LCD and a USB port.

The CCR1016-12S-1S+ comes with redundant power supplies and one RJ45 SFP 10/100/1000M copper module.

$745.00 Add to Quote
Router
Cloud Router Switch 317-1G-16S+RM with RouterOS L6

The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features, it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management.

CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance for all sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning Tree Protocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for your demanding network.

The unit has dual redundant power supplies and passive cooling case, so it’s completely silent – for hot environments two redundant fans will automatically keep the system cool if needed.

$399.00 Add to Quote
Switch
Cloud Router Switch CRS125-24G-1S-2HnD-IN

Cloud Router Switch is our new Smart Switch series. It combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.
What’s more – this device has a built in 2.4GHz wireless access point, this means you can have an AP, a router with any number of ports, and a full wire speed smart switch, all in one device – ideal for medium/small businesses and offices. It has 24 Gigabit ports, one SFP cage, a microUSB port and a built in Wireless AP.

Perfect SOHO gateway router, switch, 11n AP all in one box
• Ethernet, Fiber, or 4G (with optional USB modem) gateway connection to Internet
• RouterOS gateway/firewall/VPN router with passive cooling
• up to twenty-five gigabit switch ports (1xSFP and 24xRJ45)
• 1000mW high power 2.4GHz 11n wireless AP

$209.00 Add to Quote
Sale!
Router
cnPilot R201 US, 802.11ac duas band Gigabit WLAN Router with ATA

C000000L028A – cnPilot

Router cnPilot R201 US, 802.11ac duas band Gigabit WLAN Router with ATA

$100.00 $67.00 Add to Quote
Sale!
Router
cnPilot R201P, US, 802.11ac dual band Gigabit WLAN Router

C000000L030A – cnPilot

cnPilot R201P, US, 802.11ac dual band Gigabit WLAN Router withATA and PoE

$120.00 $84.42 Add to Quote
Cambium cnPilot
cnPilot™ E410 Indoor Hotspot portal Managed by Cambium’s cnMaestro™ cloud controller

cnPilot™ E410 Indoor
802.11ac wave 2 dual band 2×2 indoor access point
Future proof your indoor deployments with the compact, low profile, 802.11ac Wave 2 Multi-user MIMO (MU-MIMO)
beamforming, high-speed E410 Enterprise Access Point. The E410 is perfect for schools, malls, hotels, resorts, coffee shops, multi-dwelling units (MDUs), or any indoor environment that needs reliable, high performance access points.

$264.00 Add to Quote
Router
D303 – Wireless N300 ADSL2+/3G Modem Router

Tenda D303 is an All-In-One Device that includes Wireless-N 300Mbps router, four-Port Ethernet switch, 3G and NAS in one unit. The device provides triple WAN ports for broadband connection to ensure an uninterrupted connection. It connects to high speed network through DSL or Ethernet connections. Also, by simply plug an activated 3G USB modem, the device connects to a mobile broadband. So when the DSL/cable connections is disconnected, it will connect to a mobile network. When DSL/cable connection is restored, it reconnects to reduce connection billing. Hence, the D303 is an ideal solution for office situations where a constant and uninterrupted connection is critical, or residences where fixed broadband connection is not available.

$23.59 Add to Quote
Modem
D305 – N300 Blazing-fast & Stable ADSL2+ Modem Router

Tenda D305 combines the function of 300Mbps wireless router , ADSL2+Modem in one device to provide one-stop networking solution. With external 4*5dBi high gain omni-directional antennas with external PA, D305 can provide ultimate WiFi coverage for large house.

$27.33 Add to Quote
desktop
desktop Cloud Router Switch CRS106-1C-5S

The Cloud Router Switch 106-1C-5S is a desktop size smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. The package includes a power supply. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with a L5 license and supports 11- 30V power.

At $59 price range this product provides a market leading solution for connecting up to six SFP devices.

$59.00 Add to Quote
Router
Edge Router Pro router 8-Port Router with 2 SFP/RJ45 Ports

8-Port Router with 2 SFP/RJ45 Ports

The EdgeRouter PRO combines 2 million+ packets per second performance with fiber connectivity options.

$369.00 Add to Quote
Switch
Edge Switch Lite Managed Gigabit Switch with SFP

Managed Gigabit Switch with SFP

Available with 24 or 48 RJ45 Gigabit ports, the EdgeSwitch Lite delivers robust performance and intelligent switching for growing networks.

$215.00$415.00 Select options
ethernet
ethernet RB450 5 port ethernet router serial port OEM applications.

The RB450 is a five port ethernet router with serial port and power jack for OEM applications.

The RB450 includes a switch chip, which means that it’s five ports can be combined to function as a switch increasing port to port communication speed.

The RB450 series are your perfect wired router for installations where wireless interfaces are not required.

$69.00 Add to Quote
ethernet
ethernet SOHO switch RouterBoard RB260GSP

The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products – SwOS.

$55.95 Add to Quote
Router
F9 – 600M Whole-Home Coverage Wi-Fi Router

Tenda F9 600Mbps High Speed and whole-home coverage Wi-Fi router,Compared to 450Mbps and 300Mbps products, it’s transmission is more efficient and smooth,It support Smartphone APP remote management, you can manage your device at anytime and anywhere. 4*6dBi High-gain omnidirectional antennas, incredible Wi-Fi coverage and reliability.

$25.83 Add to Quote
fast router
fast router Cloud Core Router CCR1016-12G

CCR1016 is an industrial grade super fast router with cutting edge 16 core CPU. If you need many millions of packets per second – Cloud Core Router is your best choice.

The cloud core router is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.

The device is available with a 1U rackmount case, has twelve Gigabit ethernet ports, a serial console cable and a USB port. The CCR1016-12G has two SODIMM slots, by default it is shipped with 2GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). It comes with power supply and 1U rackmount case.

$645.00 Add to Quote
modules
GPON OLT SFP modules for UFiber OLT

GPON OLT SFP modules for UFiber OLT

Ubiquiti Networks offers UFiber GPON modules to increase the capacity of your UFiber OLT and connect your new customers quickly.

Models:

UF-GP-B+ |

UFGPB+ | UFGPC+

$0.00 Select options
GPON Optical Network Unit uf-loco

Nano GPON Optical Network Unit

The U Fiber Nano G is a robust, highperformance
GPON CPE that features a  sleek, sophisticated industrial
design.

Features
WAN: (1) GPON Port
LAN: (1) Gigabit Ethernet Port
GPON Speeds: 2.488 Gbps Downstream (RX),1.244 Gbps Upstream (TX)
Wavelengths: 1490 nm Downstream (RX),1310 nm Upstream (TX)
• • Max. Power Consumption: 7W
Power Method: 24V Passive PoE
Mounting: Wall-Mountable (Indoor)

$49.00 Add to Quote
2GHz
hAP 2GHz dual band Gigabit ports 802.11 b/g/n and 5GHz a/n modes

The hAP ac is our most universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes.

The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location.

Other helpful features include a USB port for attaching extra storage or a 3G/4G modem, PoE output on the last Ethernet port, to power other RouterBOARD devices without needing an extra power adapter and a SFP cage, for connecting active or passive optical network modules.

$129.00 Select options
64MB
hAP ac lite – RB952Ui-5ac2nD 2.4GHz 5GHz 650MHz CPU, 64MB RAM

The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time.

Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license.

We have two versions available – RB952Ui-5ac2nD (International) and RB952Ui-5ac2nD-US (USA). RB952Ui-5ac2nD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. RB952Ui-5ac2nD (International) supports 2412-2484MHz and 5150MHz – 5875MHz range.

$49.95 Select options
ethernet
hEX PoE lite hEX PoE lite 5 port ethernet

hEX PoE lite is a small five port ethernet router in a plastic case, it has a USB 2.0 port and PoE output.

Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded.

It is affordable, small and easy to use. With it’s compact design and clean looks, it will fit perfectly into any SOHO environment.

$59.95 Add to Quote
Mikrorik
hEX S 5x Gigabit Ethernet RouterOS L4, RB760IGS

hEX S is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. Compared to the hEX, the hEX S also features an SFP port and PoE output on the last port.

It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880 MHz CPU and 256 MB RAM, capable of all the advanced configurations that RouterOS supports. The device has a USB 2.0, PoE output for Ethernet port #5 and a 1.25Gbit/s SFP cage.

IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, microSD slot on it provides improved r/w speed for file storage and Dude.

Add to Quote
LigoDLB
LigoDLB 5-20-ac (750 MHz), QCA 9882 64 MBytes RAM 16 MBytes

Incredible Performance

500+ Mbps throughput – a result of powerful hardware platform with 802.11ac technology based radio and a proprietary data transmission protocol (iPoll). Incorporating a QCA 9563 CPU (750 MHz), a QCA 9882 radio and 64 MBytes of RAM and 16 MBytes of flash memory, the LigoDLB 5-15 ac series devices are an ideal solution for capacity demanding applications. State of the art RF design with great output power and sensitivity parameters improve range and capacity over highest the modulation – 256 QAM. The 24V Gigabit Ethernet port (passive PoE) allows utilizing the full capacity of the radio when used in a point-to-point or point-to-multipoint network design. LigoDLB ac series devices are backwards compatible with LigoDLB devices using iPoll mode, which helps to expand or upgrade existing networks using the latest technologies over time.

5 GHz high-capacity wireless device

$95.00 Add to Quote
LiteBeam
LiteBeam® AC – LBE-5AC-GEN2

5GHz airMAX AC LiteBeam Gen2 Radio with speeds up to 450+Mbps, 23dBi antenna; v8 airOS with airMAX processor & airMagic; dedicated WiFi radio for management with quick setup via UMobile App

$65.00$320.00 Select options
mANTBox
mANTBox antennas RB921GS-5HPacD-19S

The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB921 device, the mANTBox comes ready to use with everything included. The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power.

mANTBox 19s comes with 19dBi 120 degree sector antenna.

We have two versions available – RB921GS-5HPacD-19S (International) and RB921GS-5HPacD-19S-US (USA). RB921GS-5HPacD-19S-US (USA) is factory locked for 5.17 – 5.25 GHz and 5.725 – 5.835 GHz frequencies. This lock can not be removed. RB921GS-5HPacD-19S (International) supports 5.17 – 5.835 GHz range.

$199.00 Select options
RouterOS
mAP 2n – RBmAP2n

The mAP (micro Access Point) is a tiny size wireless 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources – USB, Passive PoE and power jack. It also works as a PoE injector – the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.

$45.00 Add to Quote
mAP
mAP lite – RBmAPL-2nD Ethernet port mikrotik improve your laptop signal

The mAP lite is our smallest wireless access point. It is barely larger than a matchbox, we even had to use a special Ethernet port to match it’s slim profile.

You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices, or as a client device to improve your laptop signal range, the tiny mAP lite will be always with you.

It can also serve as a simple configuration tool for your servers, if there is no ethernet on your mobile device.

The mAP lite is a dual chain 802.11 b/g/n device and operates in 2GHz.

$25.00 Add to Quote