2 GHz
2 GHz Rocket AC – R2AC

Ubiquiti 2 GHz Networks has designed airMAX ac radios with high performance and ease of installation in mind. The Rocket®2AC Prism features both airMAX ac and airPrism technologies for maximum wireless performance in high‑density areas.

Pair the Rocket 2AC Prism with airMAX ac antennas for optimal performance:
• PtP backhaul RocketDish™ ac Antenna
• PtMP links airMAX ac Sector

2.4 GHz Coverage
Deploy the Rocket 2AC Prism anywhere in the world. It delivers complete coverage of the 2.4 GHz spectrum with a single radio. The Rocket 2AC Prism allows for flexibility in configuring channel bandwidths (subject to local country regulations).

Add to Quote
Dipole
2.4 GHz Dipole – ACOMNIRPSMA

Now we offer 2.4Ghz 5dBi Dipole antennas with RPSMA connectors! Take BaseBox2 and simply attach two of those antennas on connectors of BaseBox2 to have 2×2 MIMO 2.4Ghz AP! By this you can have “2.4Ghz OmniTik”, ideal for Outdoor Campus areas, for example, campings or trailer parks. Antennas are waterproof, so you can use BaseBox without top cover if both antennas are properly attached.

Add to Quote
64MB
64MB RouterBOARD 2011iL-RM with Atheros 74K

The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.

The RB2011iL-RM includes a new feature – power injector on Ethernet port 10 – it can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports and five Fast Ethernet ports for unbeliveable USD 99!

RouterBOARD 2011iL-RM comes with 1U rackmount enclosure and power supply.

Add to Quote
N300
A9 – Wireless N300 Universal Range Extender

A9 is a wireless N300 universal range extender, specially designed to extend the exisiting WiFi coverage and improve the signal strength. With one button extension, smart signal LED, wall-mount design and universal compatibility, it is easy for users to boost wireless networking. A9 is an ideal choice for you to eliminate WiFi dead zones and optimize your networking.

Add to Quote
Dual-band
AC6 – AC1200 Smart Dual-Band WIFI Router

AC6 is a Smart Dual-band WiFi Router with strong signal and stable performance. It supports 5th generation Wi-Fi standard 802.11ac and the concurent dual-band speed is up to 1167Mbps. 900MHz CPU from Broadcom offers fast & stable performance. AC6 has 2x through-wall ability than normal routers with its independent power amplifiers, beamforming+ Intelligent technology and 4x 5dBi HG antennas. You can enjoy lag-free gaming and uninterrupted video streaming anytime anywhere. Additionally, AC6 supports smart power saving technology, App remote management, creates a low-power consumption and smart eco-friendly life for your whole family.

Add to Quote
access point
access point hAP – RB951Ui-2nD small home

This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas.

The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included.

hAP provides PoE output function for port #5 – it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the fTik network.

Add to Quote
antenna
antenna integrated SXT Lite2 – RBSXT-2nDr2

Our best price/performance 2.4Ghz CPE. The SXT Lite2 (product code RBSXT2nDr2), 2Ghz 10dBi integrated antenna with 600MHz CPU, 64MB RAM and RouterOS L3 installed.

SXT Lite2 is a low cost, high transmit power 2.4GHz (2312 -2732MHz depending on country regulations) outdoor wireless device. It can be used for point to point links or as a CPE for point to multipoint installations.

Add to Quote
antenna
antenna SXT SA5 is a low cost, gigabit 5GHz outdoor 90 degree

SXT SA5 is a low cost, high speed gigabit 5GHz outdoor wireless sector access point. It has a ninety degree antenna to provide a wider
coverage than our previous SXT units. Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes.

SXT 5 is a low cost, high speed 5GHz wireless device. It has a dual chain antenna and supports 802.11n and Nv2 TDMA technology to achieve 200Mbit throughput speed! Complete with a ready to mount enclosure and built-in antenna, this is the perfect CPE!

We are now offering the SXT SA5 bundled with FIVE SXT-5 client devices -for the price of five SXT 5 units, you get a complete kit.

Add to Quote
BaseBox2
BaseBox2 outdoor 2.4Ghz wireless device, two SMA antennas,

The BaseBox2 is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.

The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.

Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.

Select options
cable
Cable Fiber Assembly, Single Mode, 100 feet length.

Fiber Cable Assembly, Single Mode, 100 feet length. (MOQ-10)

Select options
Router
Cloud Core Router 1009-7G-1C-PC Ethernet ports

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes:

No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.

Add to Quote
core
Cloud Core Router CCR1009-7G-1C-1S+PC

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes

No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.

Unit also includes a LCD touchscreen, smart card slot, microSD and a SFP+ port for 10G connections.

Add to Quote
Switch
Cloud Router Switch CRS125-24G-1S-2HnD-IN

Cloud Router Switch is our new Smart Switch series. It combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.
What’s more – this device has a built in 2.4GHz wireless access point, this means you can have an AP, a router with any number of ports, and a full wire speed smart switch, all in one device – ideal for medium/small businesses and offices. It has 24 Gigabit ports, one SFP cage, a microUSB port and a built in Wireless AP.

Perfect SOHO gateway router, switch, 11n AP all in one box
• Ethernet, Fiber, or 4G (with optional USB modem) gateway connection to Internet
• RouterOS gateway/firewall/VPN router with passive cooling
• up to twenty-five gigabit switch ports (1xSFP and 24xRJ45)
• 1000mW high power 2.4GHz 11n wireless AP

Add to Quote
Router
cnPilot R201 US, 802.11ac duas band Gigabit WLAN Router with ATA

C000000L028A – cnPilot

Router cnPilot R201 US, 802.11ac duas band Gigabit WLAN Router with ATA

Add to Quote
Router
D303 – Wireless N300 ADSL2+/3G Modem Router

Tenda D303 is an All-In-One Device that includes Wireless-N 300Mbps router, four-Port Ethernet switch, 3G and NAS in one unit. The device provides triple WAN ports for broadband connection to ensure an uninterrupted connection. It connects to high speed network through DSL or Ethernet connections. Also, by simply plug an activated 3G USB modem, the device connects to a mobile broadband. So when the DSL/cable connections is disconnected, it will connect to a mobile network. When DSL/cable connection is restored, it reconnects to reduce connection billing. Hence, the D303 is an ideal solution for office situations where a constant and uninterrupted connection is critical, or residences where fixed broadband connection is not available.

Add to Quote
desktop
desktop Cloud Router Switch CRS106-1C-5S

The Cloud Router Switch 106-1C-5S is a desktop size smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. The package includes a power supply. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with a L5 license and supports 11- 30V power.

At $59 price range this product provides a market leading solution for connecting up to six SFP devices.

Add to Quote
ethernet
ethernet hEX Lite small 5 port router plastic case. RouterOS

The RB750r2 (hEX lite) is a small five port ethernet router in a nice plastic case.

Its price is lower than the RouterOS license alone – there simply is no choice when it comes to managing your wired home network, the RB750r2 (hEX lite) has it all.

Not only it’s affordable, small, good looking and easy to use – It’s probably the most affordable MPLS capable router on the market! No more compromise between price and features – RB750r2 has both. With its compact design and clean looks, it will fit perfectly into any SOHO environment.

Box contains: RB750r2 in a plastic case, power supply

Add to Quote
ethernet
ethernet RB450 5 port ethernet router serial port OEM applications.

The RB450 is a five port ethernet router with serial port and power jack for OEM applications.

The RB450 includes a switch chip, which means that it’s five ports can be combined to function as a switch increasing port to port communication speed.

The RB450 series are your perfect wired router for installations where wireless interfaces are not required.

Add to Quote
ethernet
ethernet SOHO switch RouterBoard RB260GSP

The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products – SwOS.

Add to Quote
fast router
fast router Cloud Core Router CCR1016-12G

CCR1016 is an industrial grade super fast router with cutting edge 16 core CPU. If you need many millions of packets per second – Cloud Core Router is your best choice.

The cloud core router is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.

The device is available with a 1U rackmount case, has twelve Gigabit ethernet ports, a serial console cable and a USB port. The CCR1016-12G has two SODIMM slots, by default it is shipped with 2GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). It comes with power supply and 1U rackmount case.

Add to Quote
2GHz
hAP 2GHz dual band Gigabit ports 802.11 b/g/n and 5GHz a/n modes

The hAP ac is our most universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes.

The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location.

Other helpful features include a USB port for attaching extra storage or a 3G/4G modem, PoE output on the last Ethernet port, to power other RouterBOARD devices without needing an extra power adapter and a SFP cage, for connecting active or passive optical network modules.

Select options
64MB
hAP ac lite – RB952Ui-5ac2nD 2.4GHz 5GHz 650MHz CPU, 64MB RAM

The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time.

Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license.

We have two versions available – RB952Ui-5ac2nD (International) and RB952Ui-5ac2nD-US (USA). RB952Ui-5ac2nD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. RB952Ui-5ac2nD (International) supports 2412-2484MHz and 5150MHz – 5875MHz range.

Select options
ethernet
hEX PoE lite hEX PoE lite 5 port ethernet

hEX PoE lite is a small five port ethernet router in a plastic case, it has a USB 2.0 port and PoE output.

Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded.

It is affordable, small and easy to use. With it’s compact design and clean looks, it will fit perfectly into any SOHO environment.

Add to Quote
Mikrorik
hEX S 5x Gigabit Ethernet RouterOS L4, RB760IGS

hEX S is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. Compared to the hEX, the hEX S also features an SFP port and PoE output on the last port.

It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880 MHz CPU and 256 MB RAM, capable of all the advanced configurations that RouterOS supports. The device has a USB 2.0, PoE output for Ethernet port #5 and a 1.25Gbit/s SFP cage.

IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, microSD slot on it provides improved r/w speed for file storage and Dude.

Add to Quote
video conferencing
IPVT10 on-premise video conferencing server

IPVT10 is a powerful on-premise video conferencing server designed for modern enterprise collaborations. It offers a state-of-the-art collaboration platform that provides a superior user experience and rich collaboration features including audio/video conferencing, screen/application sharing, and group/private chats. This enterprise video conferencing server features advanced meeting control tools, flexible customization options, and supports access from a variety of devices including video conferencing room systems, video phones, PC/Mac, Android/iOS mobile devices, PSTN trunk lines, and SIP PBXs. IPVT10 provides a centralized and scalable solution to manage an entire businesses’ conferencing needs. It is ideal for enterprises with multiple locations who require an excellent visual communication experience that integrates remote employees, external customers or anyone off-site in an easy-to-use fashion.

 

IPVT10 is an on-premise server designed to support the collaboration needs of modern enterprises. It offers a state-of-the-art collaboration platform complete with rich video and audio collaboration features to provide a centralized, scalable solution to manage an entire businesses’ conferencing needs.

Add to Quote
LigoPTP RapidFire 5-23 Ultra High performance Wireless bridge

A 5 GHz point-to-point system with exceptional performance that delivers 700+ Mbps throughput. The carrier grade design with a simple and friendly user interface makes RapidFire an ideal device for high capacity and performance demanding links.

Add to Quote
5-Ports
M3 – 5-Ports Gigabit Access Controller, up to 10x data speed
  • M3 deploys in branch network mode,you just need connect the M3 to the core switch without changing your network topology.
  • After APs are powered on in the network,the APs will get the initial network profile from the M3.And then M3 can discover APs and manage APs automatically.
  • After APs are managed by M3,you can check APs online status and user connection status.
  • M3 can manage and monitor all the indoor AP such as i6 in the network.You can edit the description,SSID,channel, security,output power for APs
Add to Quote
mANTBox
mANTBox antenna wireless router RB921 device 720MHz CPU

The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB921 device, the mANTBox comes ready to use with everything included. The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power.

Add to Quote
mANTBox
mANTBox antennas RB921GS-5HPacD-19S

The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB921 device, the mANTBox comes ready to use with everything included. The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power.

mANTBox 19s comes with 19dBi 120 degree sector antenna.

We have two versions available – RB921GS-5HPacD-19S (International) and RB921GS-5HPacD-19S-US (USA). RB921GS-5HPacD-19S-US (USA) is factory locked for 5.17 – 5.25 GHz and 5.725 – 5.835 GHz frequencies. This lock can not be removed. RB921GS-5HPacD-19S (International) supports 5.17 – 5.835 GHz range.

Select options
RouterOS
mAP 2n – RBmAP2n

The mAP (micro Access Point) is a tiny size wireless 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources – USB, Passive PoE and power jack. It also works as a PoE injector – the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.

Add to Quote
mAP
mAP lite – RBmAPL-2nD Ethernet port mikrotik improve your laptop signal

The mAP lite is our smallest wireless access point. It is barely larger than a matchbox, we even had to use a special Ethernet port to match it’s slim profile.

You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices, or as a client device to improve your laptop signal range, the tiny mAP lite will be always with you.

It can also serve as a simple configuration tool for your servers, if there is no ethernet on your mobile device.

The mAP lite is a dual chain 802.11 b/g/n device and operates in 2GHz.

Add to Quote
Gigabit
Metal 52 ac Gigabit Ethernet port wireless band (2.4GHz or 5GHz)

Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilize the full benefit of 802.11ac high speed wireless.

The Metal 52 ac supports 2.4GHz, 5GHz and all the legacy wireless modes as well (802.11 b/g/n for 2.4GHz and 802.11 ac/n/a for 5GHz).

We have two versions available.

– RBMetalG-52SHPacn-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

– RBMetalG-52SHPacn (International) supports 2412-2484MHz and 5150MHz-5875MHz range.

Select options
micro Access Point wireless Dual-Chain 2.4GHz

The mAP (micro Access Point) is a tiny size wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources – USB, Passive PoE and power jack. It also works as a PoE injector – the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.

Add to Quote
Router
MikroTik 5G Ethernet RouterOS RB450Gx4

The RB450Gx4 is an Ethernet router with five Gigabit
Ethernet ports, a serial port, 512 MB NAND memory
and a microSD card slot. In addition, it supports full
10 V – 57 V input by two power jacks or PoE (802.3af/
at or passive PoE) and can provide PoE output for
Ethernet port #5.

Add to Quote
mikrotik
mikrotik OmniTIK 5 ac ethernet antenna mikrotik
OmniTIK 5 ac

We are glad to introduce a significant upgrade to our popular OmniTik 5GHz access points!

OmniTik 5 ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 1,300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.

– OmniTIK 5 ac US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

– OmniTIK 5 ac (International) supports 5150MHz-5875MHz range.

 

OmniTIK 5 PoE ac

We are glad to introduce a significant upgrade to our popular OmniTik 5GHz access points!

OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 1,300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.

It also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 48V devices (like IP camera), if 48V input is used.

– OmniTIK 5 PoE ac US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

– OmniTIK 5 PoE ac (International) supports 5150MHz-5875MHz range.

Add to Quote
Mikrotik!
Mikrotik SXTsq Lite2 lightweight outdoor routerwith an integrated antenna.

The SXTsq Lite2 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links or as a CPE unit. It is compact, weatherproof and easy to mount.

The SXTsq Lite2 retains a 10 dBi antenna like the SXT Lite2, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced – the SXTsq is two times thinner.

Add to Quote
mikrotik
mikrotik wAP weatherproof wireless access point Gigabit Ethernet port

The wAP ac is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.

The device has one Gigabit Ethernet port, it supports 802.11ac technology and can work at both the 2.4GHz and 5GHz frequencies simultaneously. It looks unobtrusive and sleek.

The wAP ac is weatherproof and can be fixed to any external wall from the inside of the case – so that it is securely attached to it’s mounting location. The bottom door can also be secured with a special screw, which can only be opened by the owner.

Select options
multi-port
multi-port RouterBOARD RB2011UiAS-2HnD-IN

The RB2011Ui is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.

RouterBOARD 2011UiAS-2HnD has most features and interfaces from all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful 1000mW dual chain 2.4Ghz (2312-2732MHz depending on country regulations) 802.11bgn wireless AP, RJ45 serial port, microUSB port and RouterOS L5 license, as well as desktop case with power supply, two 4dBi Omni antennas and LCD panel- all this for only $129!

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

RouterBOARD 2011UAS-2HnD-IN comes with desktop enclosure, LCD panel and power supply.

Wall mount kit (product code RBWMK) for network closet is available for purchase as an optional accessory.

The RB2011Ui also has passive PoE output capability on the last port (ETH10), this means you can power another device just by connecting it over regular Ethernet cable

Add to Quote
Ubiquiti
NanoStation AC 5 GHz airMAX® ac CPE Ubiquiti

Ubiquiti Networks set the bar for the world’s first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M.
The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along
with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management.
The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and
NanoStation AC loco get maximum gain out of the smallest footprint.
The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make
them extremely versatile and economical to deploy.

Select options
weatherproof
OmniTIK weatherproof dual-polarized omni antennas

OmniTIK 5

OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas – the perfect companion for our SXT, or for any other 802.11 standard device.

Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 1000mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal – or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features

Box contains: OmniTik U-5HnD, mounting loops, PoE injector, power adapter

OmniTIK 5 PoE

OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas – the perfect companion for our SXT, or for any other 5GHz 802.11a/n standard device. Weatherproof, durable and ready to use. It has ve 10/100 Ethernet ports, PoE support and a built-in 1000mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal – or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive.

The OmniTIK UPA also features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters to worry about.

Box contains OmniTik UPA-5HnD, mounting loops, PoE injector, 24v 2.5A power adapter

Add to Quote