1UTSPRS – TOUGHSWITCH BRACKETS

1UTSPRS

Holds any two of the following:
Tough Switch Pro (8 port)

$49.95 Add to cart
1UURS – TOUGHSWITCH BRACKETS

1UURS

Holds any two of the following:
Tough Switch (5 port)
Tough Switch Pro (8 port)

$59.95 Add to cart
1UURSPOE – TOUGHSWITCH BRACKETS

1UURSPOE

Holds any of the following combinations:
EdgeMAX Lite Router and Tough Switch or Tough Switch Pro
EdgeMAX POE Router and Tough Switch or Tough Switch Pro
Tough Switch and Tough Switch Pro
Tough Switch Pro and Tough Switch Pro

$59.95 Add to cart
EECA-100 – CABLE & CONNECTORS

EECA-100

Ideal for fastening Ethernet cables to masonry walls, just drill a hole and push in.

$6.00 Add to cart
EECC-100 – CABLE & CONNECTORS

EECC-100

Ideal for attching wire to wood or vynle siding.

If using with metal siding pre-drill hole for best results.

$7.00 Add to cart
NPM30WM – MOUNTS AND HARDWARE

NPM30WM

Non penetrating flat roof mount up to 30′

 

$1,495.00 Add to cart
NPM6B5M – MOUNTS AND HARDWARE

NPM6B5M

6 Block Non-Penetrating Mount
5′ MAST INCLUDED

$79.95 Add to cart
NPM6BNM – MOUNTS AND HARDWARE

NPM6BNM

6 Block Non-Penetrating Mount
5′ MAST NOT INCLUDED

$69.95 Add to cart
RFA-RJ45-100 – CABLE & CONNECTORS

RFA-RJ45-100

Use with shielded CAT5e with ESD drain wire.

Easy field crimping with no soldering required.

Gold plated connectors.

$29.95 Read more
UACSB – SECTOR KITS

UACSB

Fits the following Ubiquiti antennas:
AM-5AC21-60 (AC 5 GHz 60 degree 21 dB)
AM-5AC22-45 (AC 5 GHz 45 degree 22 dB)

Note: Radio/Antenna are NOT included.

$49.95 Add to cart
UCM3T – MOUNTS AND HARDWARE

UCM3T

Works with Standard, Titanium, or AC airMAXsectors.

The cluster mount allows 45, 60, 90, 120 degree sectors to be placed on a single pole at the same horizontal elevation in a very tight cluster.

You can mix and match 2.4 GHz, 3.65 GHz, and 5 GHz sectors.

Use of RF Armor shield kits is required to prevent self interference as the sectors will be mounted very close together.

$149.95 Add to cart
UCM4T – MOUNTS AND HARDWARE

UCM4T

Works with Standard, Titanium, or AC airMAXsectors.

The cluster mount allows 45, 60, 90, 120 degree sectors to be placed on a single pole at the same horizontal elevation in a very tight cluster.

You can mix and match 2.4 GHz, 3.65 GHz, and 5 GHz sectors.

Use of RF Armor shield kits is required to prevent self interference as the sectors will be mounted very close together.

$159.95 Add to cart
UCM5T – MOUNTS AND HARDWARE

UCM5T

Works with Standard, Titanium, or AC airMAXsectors.

The cluster mount allows 45, 60, 90, 120 degree sectors to be placed on a single pole at the same horizontal elevation in a very tight cluster.

You can mix and match 2.4 GHz, 3.65 GHz, and 5 GHz sectors.

Use of RF Armor shield kits is required to prevent self interference as the sectors will be mounted very close together.

$169.95 Add to cart
UCM6T – MOUNTS AND HARDWARE

UCM6T

Works with Standard, Titanium, or AC airMAXsectors.

The cluster mount allows 45, 60, 90, 120 degree sectors to be placed on a single pole at the same horizontal elevation in a very tight cluster.

You can mix and match 2.4 GHz, 3.65 GHz, and 5 GHz sectors.

Use of RF Armor shield kits is required to prevent self interference as the sectors will be mounted very close together.

$279.95 Add to cart
UDK25X – NEW AFX DESIGN – DISH KITS

UDK25X *NEW AFX DESIGN

Fits the following Ubiquiti antennas:
RD-2G-24 (2 GHz, 24 dBi)
RD-5G-30 (5 GHz, 30 dBi)

 

Works with ALL airMAX Rockets – 802.11n and newer 802.11ac versions

Works with AF5X

 

DOES NOT FIT AF-5G30-S45

IMPROVED Radome material – super UV protection

NOTE: Radio/Antenna NOT included.

 

You can also install the slant 45 (AF-5G-OMT-S45) on to the dish (RD-5G-30) with our kit.

As a WISP I see better performance with the original RD-5G-30 with the AD-5G-OMT-S45 with the UDK25X over the new Ubiquiti AF-5G30-S45

Remember when installing the UDK25X on the the RD-5G-30 to first remove all the plastic crap from the back of the dish and follow the instructions.

$179.95 Add to cart
UDK3X – NEW AFX DESIGN – DISH KITS

UDK3X *NEW AFX DESIGN

Fits the following Ubiquiti antennas:
RD-3G-26 (3 GHz, 26 dBi)

Works with ALL airMAX Rockets – 802.11n and newer 802.11ac versions
Works with AF3X

IMPROVED Radome material – super UV protection

NOTE: Radio/Antenna NOT included.

$189.95 Add to cart
UDK5X – NEW AFX DESIGN – DISH KITS

UDK5X – NEW AFX DESIGN

Fits the following Ubiquiti antennas:
RD-2G-34 (5 GHz, 34 dBi)

Works with ALL airMAX Rockets – 802.11n and newer 802.11ac versions

Works with AF5X
IMPROVED Radome material – super UV protection

NOTE: Radio/Antenna NOT included.

$279.95 Add to cart
UDR235 – DISH KITS

UDR235

Fits the following Ubiquiti antennas:
RD-2G24 (2 GHz, 24 dBi)
RD-3G26 (3 GHz, 26 dBi)
RD-5G30 (5 GHz, 30 dBi)

Includes just the Radome Tube Shield.

We do NOT recommend using just the Rocket cover or just the Radome.
We designed these units to work in tandem as a KIT.

IMPROVED Radome material – super UV protection

NOTE: Radio/Antenna NOT included.

 

 

$129.95 Add to cart
UDR5 – DISH KITS

UDR5

Fits the following Ubiquiti antennas:
RD-5G34 (5 GHz, 34 dBi)Includes just the Radome Tube Shield.We do NOT recommend using just the Rocket cover or just the Radome.
We designed these units to work in tandem as a KIT.

 

IMPROVED Radome material – super UV protection

NOTE: Radio/Antenna NOT included.

$179.95 Add to cart
UDRF235 – DISH KITS
NEW MATERIAL BETTER UV PROTECTION LONGER LASTING

Fits the following RF Armor Kit:
UDR235
UDK25
UDK3

This is a replacement radome face for the 24″ Dish Kits.

$29.95 Add to cart
UDRF5 – NEW MATERIAL – DISH KITS

UDRF5 – NEW MATERIAL

NEW MATERIAL WITH BETTER UV PROTECTION AND LONGER LASTING

Fits the following RF Armor Kit:

UDK5

UDR5

This is a replacement radome face for the 40″ Dish Kit.

$29.95 Add to cart
UDS25X – NEW AFX DESIGN – DISH KITS

UDS25X *NEW AFX DESIGN

Does not include the Radome, this is just the Rocket cover on the back of the dish.

Fits the following Ubiquiti antennas:
RD-2G-24 (2 GHz, 24 dBi)
RD-5G-30 (5 GHz, 30 dBi)
RD-5G-34 (5 GHz, 34 dBi)

Works with ALL airMAX Rockets – 802.11n and newer 802.11ac versions

Works with AF5X

NOTE: Radio/Antenna NOT included.

$99.95 Add to cart
UDS3X – NEW AFX DESIGN – DISH KITS

UDS3X *NEW AFX DESIGN*

Fits the following Ubiquiti antennas:
RD-3G-26 (3 GHz, 26 dBi)

Works with ALL airMAX Rockets – 802.11n and newer 802.11ac versions

Works with AF3X

NOTE: Radio/Antenna NOT included.

 

DOES NOT INCLUDE RADOME ANTENNA SHIELD
Does not include Antenna or Rocket.

$99.95 Add to cart
UGAH235 – SECTOR KITS

UGAH235

Fits the follow RF Armor Shields:
USK1203
USK12025
USK9025

$9.95 Add to cart
UGAH5 – SECTOR KITS

UGAH5

Fits the follow RF Armor Shields:
USK1205
USK905

 

$9.95 Add to cart