new multi port device
RouterBoard RB3011UiAS-RM new multi port device

The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher performance than ever before. The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a SuperSpeed full size USB 3.0 port, for adding storage or an external 3G/4G modem.

RB3011UiAS-RM Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port.

Add to Quote
S-RJ01
S-RJ01 S-RJ01 is RJ45 SFP copper module, most Gigabit SFP ports

S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately.

Add to Quote
devices
S+DA0001 devices cost-effective way to connect two SFP/SFP+

This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks.

They provide a low cost, low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications.

Add to Quote
transceivers
SFP transceivers 1.25G SFP transceiver with a 850nm Dual

To complement our SFP cage equipped devices, we are now offering several SFP optical ber transceivers that are compatible and tested with our products. Several types are available for the most popular SFP use scenarios.

Four of the modules are available separately, to connect to existing networks, or to make your own kits, and two of them are available as a kit, for one 20KM link.

Units are tested and compatible with all our SFP products.

S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual ber LC connector, for up to 550 meter Multi Mode ber connection, with DDMI

S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual ber LC connec- tor, for up to 20 kilometer Single Mode ber connections, with DDMI

S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a single ber LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDMI. The S-53LC20D is a 1.25G Single Mode optical SFP transeiver with an LC connector,T1550nm/ R1310nm, which works for connections up to 20km and supports DDMI.

Also available now, the SFP+ modules for our new SFP+ CCR model, S+85DL- C03D and S+31DLC10D offer 10G speeds at a very affordable price.

Select options
series
smallest outdoor series model 2.4GHz or 5GHz Ethernet RouterOS

Our smallest outdoor series model – a fully featured wireless RouterBOARD powered by RouterOS.

Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless.

Select options
outdoor
SXT 5 – RBSXT-5HPnDr2 outdoor wireless device

SXT 5 is a low cost, high transmit power 5GHz outdoor wireless device. Up to 1250mW transmit power! SXT 5 can be used for point to point links or as a CPE for point to multipoint installations.

Complete with a ready to mount enclosure and built-in 16dBi antenna, the package contains everything you need to make a point to point link, or connect to an AP.

Box contains: one SXT 5, PoE injector, 24V power adapter, mounting bracket, metallic mounting loop.

Add to Quote
SXT 5 ac RBSXTG-5HPacD

The SXT ac is a new member in our 802.11ac product lineup, currently two models are available — with regular 28 degree antenna, and the SA model with a 90 wide beam- width sector antenna. Also supports 802.11a/n mode and is compatible with all legacy RouterBOARD devices, including Nstream and Nv2 protocols. Both devices come with Gigabit Ethernet.

New products are backwards compatible- for example, you can replace your 5GHz 802.11an legacy Access Point with new 802.11ac product and your existing customers will still be able to connect to it.

Add to Quote
antenna
SXT Lite5 – RBSXT-5nDr2

Our best price/performance 5Ghz CPE. The SXT Lite5 (product code RBSXT5nDr2), 5Ghz 16dBi integrated antenna with 600MHz CPU, 64MB RAM and RouterOS L3 installed.

SXT Lite5 is a low cost, high transmit power 5GHz outdoor wireless device. It can be used for point to point links or as a CPE for point to multipoint installations.

Add to Quote
SXT LTE kit RBSXT KIT 2

The SXT LTE kit (product code RBSXTR&R11e-LTE) is a device for remote locations that are within cellular network coverage. However, due to it’s professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t.

In comparison with our first generation model RBSXTLTE3-7, the SXT LTE kit is powered by faster CPU and supports not only LTE with more speeds, but also 2G and 3G, as well as much wider band range.

Add to Quote
SXT SA5 ac RBSXTG-5HPacD-SA

The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAM modulation, and 80MHz channels. 802.11a/n/ac opens up new possibilities and speeds never possible before.

The SXT ac is a new member in our 802.11ac product lineup, currently two models are available — with regular 28 degree antenna, and the SA model with a 90 wide beam – width sector antenna. Also support 802.11a/n standard, Nstreme and Nv2 protocols and are compatible with all legacy RouterBOARD devices.
 Both devices come with Gigabit Ethernet.

New products are backwards compatible – for example, you can replace your 5GHz 802.11a/n legacy Access Point with new 802.11ac product and your existing customers will still be able to connect to it.

Add to Quote
SXTG-5HPnD-SAr2
SXTG-5HPnD-SAr2 is a low cost, high speed 5GHz outdoor wireless

SXTG-5HPnD-SAr2 is a low cost, high speed 5GHz outdoor wireless sector access point. It has a 90 degree antenna to provide a wider coverage than our previous SXT units.

Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes. The inside of the case is covered in special shielding to improve operation in high interference areas and antenna front to back ratio.

Box contains: SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE injector, power adapter, quick setup guide

Add to Quote
wireless
SXTsq Lite5 outdoor wireless device with an integrated antenna

The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced – the SXTsq is two times thinner (see photos for comparison).

The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows to adjust in every angle (see photo and related product).

– SXTsq Lite5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

– SXTsq Lite5 (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

 

Add to Quote
SXTsq Lite60 2 and 5 GHz wireless

The SXTsq Lite60 is a new model in our 60 GHz lineup. This is a low cost CPE unit for connecting to a 60 GHz AP, enabling you to build a cost effective point to multipoint setup in the clean 60 GHz wireless spectrum. Connect up to eight of these CPE units to a 60 GHz
access point, such as our wAP60G AP.

Add to Quote
The 4011 Serie RB4011iGS+5HacQ2HnD-IN

The WiFi model is a dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5 GHz. For legacy devices, the unit also has a dual chain 2 GHz interface. The device has large external antennas for amazing 360 degree coverage.
In addition to the ten 1 Gbps ethernet ports, an SFP+ port provides optional 10 Gbps connectivity through an SFP+ module (not included).

Add to Quote
The 4011 Serie RB4011iGS+RM

The RB11 uses the amazingly powerful quad core Cortex A15 chip from annapurna labs, an Amazon company, same as in our carrier grade RB1100AHx4 unit. The cpu supports IPsec hardware acceleration, there is 1gb of RAM, so this device will easily handles any task you have configured RouterOS to perform. ALL of this power, in a compact and professional looking solid metal enclosure in matte black

Add to Quote
panel antenna
transmitter QRT 2 – RBQRTG-2SHPnD

The QRT-2 is rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 17dBi antenna and a super high power 2Ghz wireless transmitter.

Inside is a new dual chain wireless device, with high performance, high output power wireless transmitter, and a Gigabit Ethernet port, to fully utilize the benefit of 802.11n high speed wireless.

Easy to use and quick to deploy, QRT is ideal for point-to-point links.

Add to Quote
Universal indoor case MikroTik CA411U
The Mikrotik CA411U – Tremendous Enclosure for RB/411U boards. This MikroTik CA411U case is a Black Aluminium indoor case which excellently works with the RouterBoard RB411U and RB411UAHR, designed with a special hole for USB, 3 x holes for N female Bulkhead connector or AC/SWI Swivel antenna.
Mikrotik indoor case CA411U is the one of the best products from MirkroTik made up with the high quality material which is strong and affordable. MikroTik is the leader in manufacturing the network router products, offering mikrotik ca411u case with usb at cost effective price, delivering the quality to their customers. Some of the Mikrotik CA411U indoor case with usb hole features include:
Add to Quote
mikrotik
wAP mikrotik weatherproof wireless access point WAP LTE KIT

The wAP is a small weatherproof wireless access point for your mobile devices – perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.

The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek, available in two colours – black (RBwAP2nD-BE) and white (RBwAP2nD).

The wAP is weatherproof and can be fixed to any external wall from the inside of the case – so that it is securely attached to it’s mounting location. The bottom door can also be secured with a special screw, which can only be opened by the owner.

It is also possible to run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. This way, the unit doesn’t attract attention and blends into any environment.

Add to Quote
Wifi
Wifi Access Point hAP ac lite tower – RB952Ui-5ac2nD-TC

The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time.

Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license.

New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.

We have two versions available – RB952Ui-5ac2nD-TC (International) and RB952Ui-5ac2nD-TC-US (USA). RB952Ui-5ac2nD-TC-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. RB952Ui-5ac2nD-TC (International) supports 2412-2484MHz and 5150MHz – 5875MHz range.

Select options
NetMetal
wireless NetMETAL 5 – RB921UAGS-5SHPacD- NM

This NetMetal version is equipped with super high power 1.3W 2×2 dual chain 802.11a/n/ac wireless and two RP-SMA connectors for external antennas

The NetMetal is a 802.11ac wireless device in a waterproof metal enclosure. Its rugged design is made to withstand the toughest conditions, but at the same time is easy to use and can be opened and closed with one hand. The solid aluminum enclosure also works as a reliable heat-sink for it’s high output power radio.

The NetMETAL is equipped with powerful 720Mhz CPU, 128MB RAM, one Gigabit Ethernet port, 802.11ac wireless, one SFP cage, USB, RP-SMA connectors for external antennas and RouterOS L4 license.

Add to Quote
wireless RouterBOARD
wireless router antenna GrooveA 52 – RBGrooveA-52HPn

Our smallest outdoor series model – a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high 500mW output power! GrooveA has also supports AP mode.

With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

NEW- now comes packaged with a Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz)!

Box contains: Groove unit, mounting loops, PoE injector, power adapter, Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz).

Add to Quote
wireless
wireless RouterBOARD 5 ports,USB 2.0 port 2.4GHz

The RB951Ui-2HnD is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in.

It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 – it can power other PoE capable devices with the same voltage as applied
to the unit. Maximum load on the port is 500mA.

Package contains RouterBOARD 951Ui-2HnD in a plastic case and power adapter.

Add to Quote