18W1820 Power Supply, 18 VDC out, 2000mA, 90~240 VAC in, US flat plug

Power Supply, 18 VDC out, 2000mA, 90~240 VAC in, US flat plug – NEMA 1-15P non polarized

Add to Quote
Dipole
2.4 GHz Dipole – ACOMNIRPSMA

Now we offer 2.4Ghz 5dBi Dipole antennas with RPSMA connectors! Take BaseBox2 and simply attach two of those antennas on connectors of BaseBox2 to have 2×2 MIMO 2.4Ghz AP! By this you can have “2.4Ghz OmniTik”, ideal for Outdoor Campus areas, for example, campings or trailer parks. Antennas are waterproof, so you can use BaseBox without top cover if both antennas are properly attached.

Add to Quote
24HPOW
24HPOW

24HPOW High power 24V 1.6A power supply + power plug.

Recommended for long cable runs with several high power wireless cards

Add to Quote
48W4804 Power Supply, 48 VDC out, 18Watts, 90~260 VAC in,

Power Supply, 48 VDC out, 18Watts, 90~260 VAC in, desktop, US flat plug

Add to Quote
pigtail
ACMMCXRPSMA pigtail wireless BaseBox2 or BaseBox5 cable

MMCX to RPSMA pigtail,for adding second wireless interface to BaseBox2 or BaseBox5

Length of cable 260mm

Add to Quote
Antenna
ACSWIM 2.4-5.8GHz Swivel Antenna with cable and MMCX connector.

2.4-5.8GHz Swivel Antenna with cable and MMCX connector.

Add to Quote
indoor case
CA411-711 Black aluminium indoor case

Black aluminium indoor, fits RB411, RB911, RB912 and RB922 series, set of front panels

Mikrotik RouterBoard RB411 or RB/133c Indoor case (3 universal antenna holes

CA411-711 is new indoor case for RBM11G, RB411, RB911, RB912 and RB922 series. It has changeable front panels, so you can choose one that fits the product that you actually use. Also, case is higher to accommodate high-power wireless cards and has wall mounting holes on the back.

Add to Quote
Converter Mikrotik
Converter Mikrotik 48 to 24V Gigabit PoE device

This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices.

Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output – up to 24W (up to 1A at 24V).

You can power it with virtually any 42-57V PoE solutions available on market today (Passive, Telecom, 802.3af and 802.3at PoE plus supported)

Add to Quote
cable
indoor outdoor cable Flex-guide – ACRPSMA

A super low loss 50cm long RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.

The name of this cable comes from combining the words “flexible” and “waveguide”, to denote the high end features of this product.

The inner conductor is silver plated copper, and both connectors are soldered, not crimped, for the best possible signal quality. Ideally suited for our BaseBox and other products with RPSMA connectors, and works with most antennas.

Add to Quote
pigtail
MMCX-Nfemale pigtail cable for adding external antennas

MMCX-Nfemale pigtail cable for adding external antennas. Total length including connectors is 385mm.

Add to Quote
module
module SFP GPON – SFPONU Fiber to Home installations

The GPON module allows any RouterBOARD device to be used for Fiber to Home installations without any special modems or software. A plug and play solution means you simply plug it into your device, and no special configuration is needed. It is supported by all our SFP products, with any RouterOS version – all configuration will be done on the ISP side.

The GPON ONU integrates GPON OMCI Stack and is fully compliant with ITU-T G.984 standards. The ONU is in a standardized MSA SFP form-factor and is designed to simply plug into a standard SFP port in your router.

The product provides a pluggable GPON ONU interface for networking equipment with an uplink SFP receptacle enabling these devices to be deployed in GPON networks for FTTx, business services, and wireless backhaul applications.

Add to Quote
quickMOUNT
quickMOUNT – QM-quickMOUNT basic wall mount adapter point to point and antennas.

The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas.

You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT gives possibility to turn antenna within 190°.

With the quickMOUNT it is possible to simultaneously mount two SXTs, thus creating a repeater access point or creating large sector coverage.

Add to Quote
quickmount
quickMOUNT extra mANT 30 or 19dBi sector mANT 19s.

The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas.

You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190°.

With the quickMOUNT extra is compatible with our long range heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT 19s.

Add to Quote
quickMOUNT
quickMOUNT pro – QMP

The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment.

The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale.

You can use the quickMOUNT pro with any pole mountable device or MikroTik’s small mounting clip with weight less than 1.5 kg.

The adapter is very durable due to it’s special plastic composite material – anvilNITE (TM).

Add to Quote
wall
RB2011 wall mount kit

The RB2011 wall mount kit (product code RBWMK) secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets. Fits all standard RB2011 indoor cases (models RB2011L-IN, RB2011LS-IN, RB2011UAS-IN and RB2011UAS-2HnD-IN), protects all ten Ethernet ports, SFP port and Serial port.

(* – Only fits self crimped Ethernet cables).

Add to Quote
Gigabit
RBGPOE MikroTik Gigabit PoE adapter RouterBOARD Gigabit Ethernet

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device.

Helps reducing number of wires that lead up the tower.

For using with any RouterBOARD that supports 9-48V PoE.

The GPOE has shielded connectors.

Add to Quote
PoE
RBPOE RouterBOARDS that support 10-28V PoE powering

Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations.

For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.

Add to Quote