ePMP Force
ePMP Force 300-16, 5GHz 16dBi RoW. C050910C111A

Cambium Networks resolves this challenge with a breakthrough technology solution that delivers

superior performance, resiliency and reach in the most congested environments. Combining the latest 802.11AC Wave 2 chipset and the field proven TDD MAC of ePMP, the Force 300-16 offers a compelling yet affordable point to point product and a future mid gain subscriber module for the ePMP 3000 Access Point.

Force 300-16 continues the tradition of previous products with an integrated 25dBi dish with a narrow beamwidth and reliable mechanics. Supporting peak throughput greater than 500Mbps, the Force300-16 will also supports an always on spectrum analyzer and local WiFi management to take advantage of mobile installation applications.

Add to Quote
ePMP Force
ePMP Force 5 GHz Force 130 C050900C505A

Product specifications


• Channel spacing: Configurable on 5MHz increments
• Frequency range: 5GHz: 5150 – 5970 MHz
• Channel width: 5, 10, 20, or 40MHz

Interface


• MAC (media access control) layer: Cambium proprietary
• Physical layer: 2×2 MiMO/OFDM
• Ethernet interface: 10/100/BaseT, Compatible with Cambium PoE pinouts (V+ = 7 & 8, Return = 4 & 5) and Standard PoE pinouts (V+ = 4 & 5, Return = 7 & 8)
• Protocols used: IPv4, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping
• Network management: HTTPs, SNMPv2c, SSH
• VLAN: 802.1Q with 802.1p priority

Performance 


• ARQ: Yes
• Nominal receive sensitivity (W/ FEC) @ 20MHZ Channel: MCS0 = -93 dBm to MCS15 = -72 dBm (per branch)
• Nominal receive sensitivity (w/ FEC) @ 40MHZ Channel: MCS0 = -90 dBm to MCS15 = -69 dBm (per branch)
• Modulations levels (ADAPTIVE): MCS0 (BPSK) to MCS15 (64QAM 5/6)
• Latency: (nominal, round trip) 6ms (flexible frame mode), 17ms (GPS sync mode)
• Quality of service: Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC address, broadcast, multicast and station priority.

Link Budget 


• Transmit power range: -17 to +30dBm (combined, to regional EIRP limit) (1 dB interval)
• Antenna gain: 14dBi
• Maximum transit power: 28 dBm combined (subject to regional regulatory restrictions)

Physical


• Antenna connection: Integrated antenna
• Surge suppression: 2 Joule Integrated
• Environmental: IP55
• Temperature: -30°C to +60°C (-22°F to +140°F)
• Wind survival: 145km/hour (90mi/hour) with antenna
• Dimensions (h x w x d): 12.4 x 25.1 x 11.9 cm (11.4 x 5.7 x 3.3in)
• Power consumption: 10W maximum, 5W typical
• Input voltage: 10 to 30V

Security
• Encryption: 128-bit AES (CCMP mode)

Product Includes:
• Radio Module
• Mounting Bracket
• Power Supply

Add to Quote
Force300
Force300 -25 Force 5 GHz High Gain Radio (ROW) (US cord) C050910C101A

Cambium Networks resolves this challenge with a breakthrough technology solution that delivers superior performance, resiliency and reach in the most congested environments. Combining the latest 802.11ac Wave 2 chipset and the field proven TDD MAC of ePMP, the Force 300-25 offers a compelling yet affordable point to point product and a future high gain subscriber module for the ePMP3000 Access Point.

Force 300-25 continues the tradition of previous products with an integrated 25dBi dish with a narrow beamwidth and reliable mechanics. Supporting peak throughput greater than 500Mbps, the Force300-25 also supports an always on spectrum analyzer and local Wi-Fi management to take advantage of mobile installation applications.

Add to Quote
N000065L003A – US Line Cord Fig 8 (IEC – 60320 Type C7)

N000065L003A

US Line Cord Fig 8 (IEC – 60320 Type C7)

Add to Quote
N000065L031A – PTP articulating mount

N000065L031A

PTP articulating mount

Add to Quote
N000900L005A – ePMP 1000 Spare GPS Antenna

N000900L005A – ePMP1000

ePMP 1000 Spare GPS Antenna

Add to Quote
N000900L006A – ePMP 1000 Connectorized Radio Mounting Bracket

N000900L006A – ePMP1000

ePMP 1000 Connectorized Radio Mounting Bracket

The ePMP Connectorized Radio Mounting Bracket is designed to allow ePMP Connectorized Radios (both GPS Synchronized and Unsynchronized versions) to be mounted to a pole or to a wall.

Add to Quote
N000900L007A – Cable, UL Power Supply Cord set, US

N000900L007A

Cable, UL Power Supply Cord set, US

Add to Quote
ePMP1000
N000900L022A – ePMP1000

N000900L022A – ePMP1000

ePMP Integrated Radio Adjudtable Pole Bracket

Add to Quote
ACCESS POINT ANTENNA
PMP 450 ACCESS POINT ANTENNA – 85009324001

5 GHz – 90° Sector Antenna

The Cambium Networks Point-to-Multipoint (PMP) 450 Access Point (AP) can provide more than 90 Mbps throughput and is interoperable with PMP 430 and PMP 100 Series Subscriber Modules (SM). Service providers with an installed base of PMP 100 subscribers can now migrate to new high-throughput PMP 450 modules to enhance overall capacity; allowing more users and/or higher rate plans.

Utilizing 2×2 MIMO-OFDM technology, new deployments can take advantage of Cambium Networks proprietary feature set, while achieving data rates higher than 90 Mbps. From the available synchronization options to its diverse feature set, the PMP 450 provides flexible deployment options that make it a good fit for high capacity, high reliability networks.

Cambium Networks provides exceptional wireless broadband connectivity solutions. With more than 3 million modules deployed in thousands of networks around the world, Cambium solutions are proven to provide cost effective, reliable data, voice and video connectivity.

Add to Quote
ACCESS POINT ANTENNA
PMP 450 ACCESS POINT ANTENNA – 85009325001

5 GHz – 60° Sector Antenna (+FSK)

Each AP can provide a specific sector size or area of coverage. PMP 450 APs are connectorized radios and can support any coverage you need. However, we recommend using the AP with the high-performance antennas that have been developed specifically for the PMP 450 product – either a 6-sector dual mode (both FSK and OFDM) or a 4-sector OFDM antenna. Your individual network and configuration may require a different sector width. If alternative configurations are needed, be sure that local regulations are followed prior to purchase.

Note that the N-type to N-type cable required to connect the AP to the antenna is not included and must be purchased separately. For an OFDM-only deployment, you will need two cables, one for the horizontal and one for the vertical OFDM polarities. If you are deploying in the Combo mode (i.e., serving both FSK and OFDM subscribers), you will need three of these cables. Each antenna is supplied with a bracket for mounting to a pole that is 2 inches (50 mm) to 3 inches (75 mm) in diameter.

Add to Quote
PMP 450 Point to Multipoint Wireless – C054045A001A

Utilizing 2×2 MIMO-OFDM technology, new deployments can take advantage of Cambium-Networks proprietary feature set, while achieving data rates higher than 90 Mbps. From the available synchronization options to its diverse feature set, the Canopy PMP 450 provides flexible deployment options that make it a good fit for high capacity, high reliability networks.

Add to Quote
PMP-450
PMP-450 5 GHz Integrated SM, 4Mbps

PMP-450 The PMP-450 subscriber unit operates in the same 5470-5875Mhz frequency range as the PMP-450 access point. The subscriber module has 4 Mbps throughput, upgradable to 10, 20, and up to 90 Mbps. Utilizing 2×2 MIMO-OFDM technology, new deployments can … Read More

Add to Quote
Spare Power Supply for Radio with 100Mbit Ethernet (no cord)

N000900L002A – ePMP1000

ePMP 1000 Spare Power Supply for Radio with 100Mbit Ethernet (no cord)

 

Add to Quote
WB3665HH – Core PTP-SYNC

WB36665HH – Core PTP

PTP – SYNC

Add to Quote